张琛,李孟东,车瑶,于彤,方烈,陈敬德.基于K-Means的特高频局部放电定位误差校正[J].电气自动化,2017,(5):106~108
基于K-Means的特高频局部放电定位误差校正
Error Correction of UHF Partial Discharge Location Based on K-Means
  修订日期:2017-01-06
DOI:
中文关键词:  特高频  局放定位  噪声干扰  K-Means  去抖动
英文关键词:ultra-high frequency (UHF)  PD location  noise interference  K-Means  de-bounce
基金项目:
作者单位
张琛 国网北京市电力公司电力科学研究院,北京 100075 
李孟东 国网四川省电力公司内江供电公司,四川 641000 
车瑶 国网北京市电力公司电力科学研究院,北京 100075 
于彤 国网北京市电力公司电力科学研究院,北京 100075 
方烈 国网北京市电力公司电力科学研究院,北京 100075 
陈敬德 上海交通大学,上海 200240 
摘要点击次数: 8865
全文下载次数: 0
中文摘要:
      基于特高频的局部放电定位技术近年来受到广泛关注,而由于变电站环境复杂,噪声干扰信号较多,导致对同一放电源的定位结果波动性较大,定位不够准确。提出了基于K-Means的测量值去抖算法,通过对多次测量结果进行综合考量来确定最优的测量值,实验结果表明,能够大大降低定位测量结果的抖动性,且提高了定位精度,具有工程可行性。
英文摘要:
      UHF-based partial discharge location technology has received wide spread attention in recent years. However, complex substation environment and much noise interference signal have led to big fluctuation of locating results for the same discharging source and to insufficient location accuracy. In this paper, we propose a K-Means-based de-bouncing algorithm to determine optimal measured value through comprehensive considerations of the results of multiple measurements. Experimental results show that the proposed algorithm can greatly reduce the bouncing of location measurement results and raise location accuracy, and that it has engineering feasibility.
查看全文  查看/发表评论  下载PDF阅读器
关闭